accura
Single Rotary Mini Tablet Press
R&D MODEL
Single Rotary Mini Tablet Press with 8 Stn. "D'', 10 Stn. "B", 10 Stn. "D" & 12 Stn. "D, B & BB"
- Special Grade S.G. Iron Casting Turret
- Type of Tooling: D Tooling (ACRA-MINI-D), B Tooling (ACRA-MINI-B)
- Electronic Digital Tablet and RPM Counter
- Maximum Output: 18,000 Tablets per Hour
- Maximum Operating Pressure: 60 kN
- Maximum Tablet Diameter: 25 mm (ACRA-MINI-D), 16 mm (ACRA-MINI-B)
- Depth of Fill: 20.50 mm (ACRA-MINI-D), 17.50 mm (ACRA-MINI-B)
Salient Features
Salient Features of Single Rotary Mini Tablet Press
-
Square GMP Table Top Model. -
Paint free tablet manufacturing zone.
-
Turret of Special Grade S.G. Iron casting.
-
Aluminium Turret Guards Anti Vibrating mount.
-
Upper punch penetration, as a standard features.
-
Transparent Acrylic Guards with interlock.
-
Electronic Digital Tablet cum RPM Counter, as a standard features.
-
Imported needle roller bearing provided at the bottom of turret.
-
Grease Nipples are provided for effective lubrication, where required.
-
Force Feeder, combination of D & B Tooling, PLC and etc. (Optionally).
Technical Specifications
| TYPE | ACRA-MINI-D | ACRA-MINI-D | ACRA-MINI-B | |
| Number of Station | 8 | 10 | 10 | |
| Type of Tooling (As per EU1) | D | D | B | |
| Output-Tablets/Hour (Min / Max.) | 4,800 / 14,400 | 6,000 / 18,000 | 6,000 / 18,000 | |
| Turret RPM (Min.- Max.) | 10 - 30 | |||
| Max. Operating pressure-Main (kN) | 60 | |||
| Max. Tablet Diameter (mm) | 25 | 16 | ||
| Max. Tablet Thickness (mm) | 8.5 | |||
| Depth of Fill (mm) | 20.50 | 17.50 | ||
| Upper Punch Entry Main (mm) | 2 To 6 | |||
| Upper Punch Entry Pre-Compression(mm) | 1 To 5 | |||
| Main Electric Motor (kw/hp) | 2.25 kW / 3 hp x 2800 RPM | |||
| Hopper Capacity | 4 Litres | |||
| Overall Dimensions (Close guard) cm | 61 W x 84 L x 110 H | |||
| Overall Dimensions (Open guard) cm | 145 W x 145 L x 143 H | |||
| Case Dimensions (cm) | 96 W x 120 L x 125 H | |||
| Net Weight (kg) | Approx. 375 | |||
| Gross Weight(kg) | Approx. 500 | |||
| Utilities : | 1) Power Supply: | (a) 415 V, 3 Phase, 50 Hz (b) 480 V, 3 Phase, 60 H (c) 220 V, 3 Phase, 60 Hz |
||
| 2) Power-Total (kw/hp): | 2.25 kW / 3 hp | |||
* Depending upon material characteristic & available room atmosphere only.
NOTE : DUE TO CONTINUOUS IMPROVEMENTS IN THE MACHINERIES, SPECIFICATION OF THE MACHINERIES IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE.
Pre-pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation. It is dependent on the physical specification of the used material for the compress.
The above specification is the subject to change without prior notice for the technical development.
It is Recomended not to use large depth of fill, minimum tablet thickness and maximum compression pressure for maximum performance consistently.
Technical rights to change catalogues, specifications and features are reserved with the manufacturer. Actual output may vary against indicated output on the product under compression and RPM on lower side.
Want to know more
about the Single Rotary Mini Tablet Press?
Send us a message
All fields marked (*) are mandatory.
Please do not hesitate to contact us if you require more information and detailed advice. We look forward to receiving your phone call or email.
OFFICE ADDRESS
I – 4116, Phase IV, Near Neeka Tube Cross Road,
G.I.D.C Vatva, Ahmedabad – 382 445,
Gujarat, India
FOLLOW US
Copyright © 2024 Fluid Pack - Blogs - Superior Quality Tablet Press , Roll Compactor Machines, Punches & Dies. All rights reserved. - SEO by Opal Infotech