accura
High Speed Single Rotary Tablet Press
ACT - VI
- With pre compression of 10 tons & Main compression of 10 tons.
- With Interchangeable Turret
- Auto Weight Through Compaction Force Control
- Auto Tablet Rejection Through Compaction Force Control
- 49 Stn. ‘D’ Tooling
- 61 Stn. ‘B’ Tooling
- 73 Stn. ‘BB’ Tooling
Salient Features
-
In compliance with cGMP. -
Motorized pre compression of 10 Tons. (100 KN)
-
Motorized main compression of 10 Tons. (100 KN)
-
Motorized Dozzer, for precise depth of fill adjustment.
-
Load cell at Pre-Compression & Main-Compression.
-
PLC & Colour Industrial PC, on Separate Operating Panel.
-
With AC Variable Drive & Zero Clearance Feeder Frame.
-
Vibration free and easy to operate at 80 RPM.
-
Sliding type Pre & Main upper press roll assly.
-
Easy turret change facility.
-
Sampling & startup rejection.
-
Sturdy Structure design.
-
Turret Lifting by External Hydraulic Trolley.
-
Turret Resting Trolley is given by default.
-
Any Turret of D-B-BB Tooling can be fitted.
-
No more Cubical- No more AHU.
-
Single Rotary Tablet Presses With Interchangeable Turret.
-
Power Main motor 15 Hp
-
Machine is Four sides open with upper Guards.
-
Control panel is separate.
Technical Specifications
| TYPE | ACT - VI 49 | ACT - VI 63 | ACT - VI 73 |
| Number of Stations | 49 | 63 | 73 |
| Type of Tooling (As per EU1) | D(EU-D. IPT D) | B(EU-B. IPT B) | BB(EU-B. IPT BB) |
| Output-Tablets/Hour (Min / Max.) | 44,100 / 2,35,200 | 45,900 / 2,92,800 | 65,700 / 3,50,400 |
| Max. Operating Pressure-Main (kN) | 100 | 100 | 100 |
| Max. Operating Pre. Pressure Tamp (kN) | 100 | 100 | 100 |
| Max. Tablet Diameter Round (mm) | 25 | 16 | 11 |
| Max. Tablet Thickness (mm) | 8.5 | ||
| Max. Depth of Fill (mm) | 4.5 – 10 For “D” & “B” & “BB” Tooling 8.5 – 14 “D” & “B” & “BB” Tooling 12.5 – 18 Suitable For “D” Tooling |
||
| Upper Punch Entry Main (mm) | 1 To 6 | ||
| Upper Punch Entry Pre Compression (mm) | 1 To 6 | ||
| Power-Total (kw/hp) | 13.17 KW / 17.84 HP | ||
| Main Electric Motor (kw/hp) | 11 KW / 15 HP X 1440 RPM | ||
| Pre. Press Roll Electric Motor(kw/hp) | 750 W x 3000 RPM | ||
| Main Press Roll Server Motor(kw/hp) | 750 W x 3000 RPM | ||
| Weight Adj. Servo Motor(kw/hp) | 750 W x 3000 RP | ||
| Feeder Servo Motor(kw/hp) | 3.37KW / 0.5 HP | ||
| Hopper Capacity | 20 Liters | ||
| Overall Dimensions(Close Guard) cm | 160L X 158W X 201H | ||
| Overall Dimensions(Open Guard) cm | 302 L X 302 W X 201 H | ||
| Utilities | Suction Air: 300 CFM | ||
| Compressed Air: 6 KG/SQ.CM (6 BAR) | |||
| Power Supply: 415 V, 3 Phase, 50 Hz | |||
* Depending upon material characteristic & available room atmosphere only.
NOTE : DUE TO CONTINUOUS IMPROVEMENTS IN THE MACHINERIES, SPECIFICATION OF THE MACHINERIES IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE.
Pre-pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation. It is dependent on the physical specification of the used material for the compress.
The above specification is the subject to change without prior notice for the technical development.
It is Recomended not to use large depth of fill, minimum tablet thickness and maximum compression pressure for maximum performance consistently.
Technical rights to change catalogues, specifications and features are reserved with the manufacturer. Actual output may vary against indicated output on the product under compression and RPM on lower side.
Want to know more
about the High Speed Single Rotary Tablet Press?
Send us a message
All fields marked (*) are mandatory.
Please do not hesitate to contact us if you require more information and detailed advice. We look forward to receiving your phone call or email.
OFFICE ADDRESS
I – 4116, Phase IV, Near Neeka Tube Cross Road,
G.I.D.C Vatva, Ahmedabad – 382 445,
Gujarat, India
FOLLOW US
Copyright © 2024 Fluid Pack - Blogs - Superior Quality Tablet Press , Roll Compactor Machines, Punches & Dies. All rights reserved. - SEO by Opal Infotech